# Global OpenRC configuration settings # Set to "YES" if you want the rc system to try and start services # in parallel for a slight speed improvement. When running in parallel we # prefix the service output with its name as the output will get # jumbled up. # WARNING: whilst we have improved parallel, it can still potentially lock # the boot process. Don't file bugs about this unless you can supply # patches that fix it without breaking other things! #rc_parallel="NO" # Set rc_interactive to "YES" and you'll be able to press the I key during # boot so you can choose to start specific services. Set to "NO" to disable # this feature. This feature is automatically disabled if rc_parallel is # set to YES. #rc_interactive="YES" # If we need to drop to a shell, you can specify it here. # If not specified we use $SHELL, otherwise the one specified in /etc/passwd, # otherwise /bin/sh # Linux users could specify /sbin/sulogin #rc_shell=/bin/sh # Do we allow any started service in the runlevel to satisfy the dependency # or do we want all of them regardless of state? For example, if net.eth0 # and net.eth1 are in the default runlevel then with rc_depend_strict="NO" # both will be started, but services that depend on 'net' will work if either # one comes up. With rc_depend_strict="YES" we would require them both to # come up. #rc_depend_strict="YES" # rc_hotplug controls which services we allow to be hotplugged. # A hotplugged service is one started by a dynamic dev manager when a matching # hardware device is found. # Hotplugged services appear in the "hotplugged" runlevel. # If rc_hotplug is set to any value, we compare the name of this service # to every pattern in the value, from left to right, and we allow the # service to be hotplugged if it matches a pattern, or if it matches no # patterns. Patterns can include shell wildcards. # To disable services from being hotplugged, prefix patterns with "!". #If rc_hotplug is not set or is empty, all hotplugging is disabled. # Example - rc_hotplug="net.wlan !net.*" # This allows net.wlan and any service not matching net.* to be hotplugged. # Example - rc_hotplug="!net.*" # This allows services that do not match "net.*" to be hotplugged. # rc_logger launches a logging daemon to log the entire rc process to # /var/log/rc.log # NOTE: Linux systems require the devfs service to be started before # logging can take place and as such cannot log the sysinit runlevel. #rc_logger="NO" # Through rc_log_path you can specify a custom log file. # The default value is: /var/log/rc.log #rc_log_path="/var/log/rc.log" # If you want verbose output for OpenRC, set this to yes. If you want # verbose output for service foo only, set it to yes in /etc/conf.d/foo. #rc_verbose=no # By default we filter the environment for our running scripts. To allow other # variables through, add them here. Use a * to allow all variables through. #rc_env_allow="VAR1 VAR2" # By default we assume that all daemons will start correctly. # However, some do not - a classic example is that they fork and return 0 AND # then child barfs on a configuration error. Or the daemon has a bug and the # child crashes. You can set the number of milliseconds start-stop-daemon # waits to check that the daemon is still running after starting here. # The default is 0 - no checking. #rc_start_wait=100 # rc_nostop is a list of services which will not stop when changing runlevels. # This still allows the service itself to be stopped when called directly. #rc_nostop="" # rc will attempt to start crashed services by default. # However, it will not stop them by default as that could bring down other # critical services. #rc_crashed_stop=NO #rc_crashed_start=YES # Set rc_nocolor to yes if you do not want colors displayed in OpenRC # output. #rc_nocolor=NO ############################################################################## # MISC CONFIGURATION VARIABLES # There variables are shared between many init scripts # Set unicode to YES to turn on unicode support for keyboards and screens. #unicode="NO" unicode="YES" # This is how long fuser should wait for a remote server to respond. The # default is 60 seconds, but it can be adjusted here. #rc_fuser_timeout=60 # Below is the default list of network fstypes. # # afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs # nfs nfs4 ocfs2 shfs smbfs # # If you would like to add to this list, you can do so by adding your # own fstypes to the following variable. #extra_net_fs_list="" ############################################################################## # SERVICE CONFIGURATION VARIABLES # These variables are documented here, but should be configured in # /etc/conf.d/foo for service foo and NOT enabled here unless you # really want them to work on a global basis. # If your service has characters in its name which are not legal in # shell variable names and you configure the variables for it in this # file, those characters should be replaced with underscores in the # variable names as shown below. # Some daemons are started and stopped via start-stop-daemon. # We can set some things on a per service basis, like the nicelevel. #SSD_NICELEVEL="-19" # Or the ionice level. The format is class[:data] , just like the # --ionice start-stop-daemon parameter. #SSD_IONICELEVEL="2:2" # Pass ulimit parameters # If you are using bash in POSIX mode for your shell, note that the # ulimit command uses a block size of 512 bytes for the -c and -f # options #rc_ulimit="-u 30" # It's possible to define extra dependencies for services like so #rc_config="/etc/foo" #rc_need="openvpn" #rc_use="net.eth0" #rc_after="clock" #rc_before="local" #rc_provide="!net" # You can also enable the above commands here for each service. Below is an # example for service foo. #rc_foo_config="/etc/foo" #rc_foo_need="openvpn" #rc_foo_after="clock" # Below is an example for service foo-bar. Note that the '-' is illegal # in a shell variable name, so we convert it to an underscore. # example for service foo-bar. #rc_foo_bar_config="/etc/foo-bar" #rc_foo_bar_need="openvpn" #rc_foo_bar_after="clock" # You can also remove dependencies. # This is mainly used for saying which services do NOT provide net. #rc_net_tap0_provide="!net" # This is the subsystem type. # It is used to match against keywords set by the keyword call in the # depend function of service scripts. # # It should be set to the value representing the environment this file is # PRESENTLY in, not the virtualization the environment is capable of. # If it is commented out, automatic detection will be used. # # The list below shows all possible settings as well as the host # operating systems where they can be used and autodetected. # # "" - nothing special # "docker" - Docker container manager (Linux) # "jail" - Jail (DragonflyBSD or FreeBSD) # "lxc" - Linux Containers # "openvz" - Linux OpenVZ # "prefix" - Prefix # "rkt" - CoreOS container management system (Linux) # "subhurd" - Hurd subhurds (to be checked) # "systemd-nspawn" - Container created by systemd-nspawn (Linux) # "uml" - Usermode Linux # "vserver" - Linux vserver # "xen0" - Xen0 Domain (Linux and NetBSD) # "xenU" - XenU Domain (Linux and NetBSD) #rc_sys="" # on Linux and Hurd, this is the number of ttys allocated for logins # It is used in the consolefont, keymaps, numlock and termencoding # service scripts. rc_tty_number=12 ############################################################################## # LINUX CGROUPS RESOURCE MANAGEMENT # If you have cgroups turned on in your kernel, this switch controls # whether or not a group for each controller is mounted under # /sys/fs/cgroup. # None of the other options in this section work if this is set to "NO". #rc_controller_cgroups="YES" # The following settings allow you to set up values for the cgroup # controllers for your services. # They can be set in this file;, however, if you do this, the settings # will apply to all of your services. # If you want different settings for each service, place the settings in # /etc/conf.d/foo for service foo. # The format is to specify the names of the settings followed by their # values. Each variable can hold multiple settings. # For example, you would use this to set the cpu.shares setting in the # cpu controller to 512 for your service. # rc_cgroup_cpu=" # cpu.shares 512 # " # #For more information about the adjustments that can be made with #cgroups, see Documentation/cgroups/* in the linux kernel source tree. # Set the blkio controller settings for this service. #rc_cgroup_blkio="" # Set the cpu controller settings for this service. #rc_cgroup_cpu="" # Add this service to the cpuacct controller (any value means yes). #rc_cgroup_cpuacct="" # Set the cpuset controller settings for this service. #rc_cgroup_cpuset="" # Set the devices controller settings for this service. #rc_cgroup_devices="" # Set the hugetlb controller settings for this service. #rc_cgroup_hugetlb="" # Set the memory controller settings for this service. #rc_cgroup_memory="" # Set the net_cls controller settings for this service. #rc_cgroup_net_cls="" # Set the net_prio controller settings for this service. #rc_cgroup_net_prio="" # Set the pids controller settings for this service. #rc_cgroup_pids="" # Set this to YES if you want all of the processes in a service's cgroup # killed when the service is stopped or restarted. # This should not be set globally because it kills all of the service's # child processes, and most of the time this is undesirable. Please set # it in /etc/conf.d/. # To perform this cleanup manually for a stopped service, you can # execute cgroup_cleanup with /etc/init.d/ cgroup_cleanup or # rc-service cgroup_cleanup. # rc_cgroup_cleanup="NO"